搜索
2005年11月编辑订货号：E20185-P920-B700-X-5D00©SIPOSAktorikGmbH2005版权所有！电动执行机构使用说明书ECOTRON经济型SIPOS5Flash+增补的使用说明书E20185-P920-B705-X-5D00。第2页E20185-P920-B700-X-5D00内容页1总的说明·······································································31.1安全操作说明································································31.2一般的安全准则····························································31.3处理和回收···································································32运输和储存···································································43框图及子部件装配·························································54安装和连接···································································64.1安装在阀门上································································64.1.1A型输出轴·································································64.1.2螺杆保护套管·····························································64.2电气连接·······································································74.3分体安装·······································································85手动及远控操作····························································95.1手柄、手轮···································································95.2就地操作面板································································95.3远端控制·····································································105.3.1远端操作··································································105.3.2参数化和观察···························································106设置参数和调试··························································116.1调试前的准备工作·······················································116.2调整信号齿轮单元的比率············································116.3设定输出速度1)，关断力矩2)，关方向，关断模式，输出信号及控制方式···················································126.4调整执行机构的行程极限（即：末端位置调整）·········146.5调整机械式位置指示器················································167状态和故障信息··························································178维护············································································188.1检查、修正和服务·······················································188.2重新上油脂·································································198.3拆卸，重装·································································198.4备件············································································20附录II.1直行程线性单元的技术数据·········································21I.2直行程关断推力与多回转关断力矩对照表····················22I.3直行程直线运动速度与多回转输出速度对照表·············22I.4直连式减速箱的技术数据············································23I.5直连式角行程关断力矩与多回转关断力矩对照表·········24I.6直连式角行程全行程时间与多回转输出转速表·············24I.7底座曲柄式减速箱的技术数据·····································25I.8底座曲柄式角行程关断力矩与多回转关断力矩对照表··26I.9底座曲柄式角行程全行程时间与多回转输出转速对照表26附录a多回转型的齿轮单元2SA5.1/2/3/4.-··························27b多回转型的齿轮单元2SA5.5/6/7/8.-··························28c直行程型的齿轮单元和线性单元2SA5.1/2/3/4.-+LE12.1/25.1/50.1/70.1························29d直行程型的齿轮单元和线性单元2SA5.5/6.-+LE100.1/200.1·········································30p小的角行程型的齿轮单元2SG5...-····························31e角行程型的齿轮单元2SA5...-+GS/GF·······················32f控制单元（电机功率至1.5kW）··································33g控制单元（电机功率从3kW起）································34n符合EC标准的声明······················································351)速度在这里同时指的是：全行程的运行时间（对直行程型执行机构而言）、定位时间（对角行程型执行机构而言）。2)关断力矩同时指的是关断推力（对直行程型执行机构而言）。E20185-P920-B700-X-5D00第3页1总的说明1.1安全操作说明本手册中，通过对下列图形符号的适当定义，来引起对安全操作步骤的注意。安全操作说明：警告标识，用于指明如果操作不正确，会对人和设备造成损害的情形。注意标识，用于指明对正确操作有重大影响的操作，如果不遵守，随后将会导致设备损坏的情形。静电敏感元件位于电路板上，静电放电会造成其损坏。如果在设定、测量或更换过程中必须接触电路板的话，必须确保要首先触摸接地的金属物体表面（如执行机构的壳体），以便对人体所带静电进行放电，随后再触摸电路板。.不遵守和安全有关的注意事项，有可能导致人员严重的伤害或设备的损坏。合格的工作人员必须彻底熟知这些操作说明中的警告和注意信息：合格的工作人员是指由工厂安全生产部门批准的、经过培训的、具有相关经验和知识，了解有关规章制度和安全规程，熟悉工作环境，熟知可能会出现的危害以及如何预防危害，可以从事相关工作的人员。此外，还要具有紧急救护的知识。在大电流的工厂应用情形下，根据规定，如DINVDE0105或IEC364，不合格人员是不允许从事相关工作的。正确的运输、恰当的存贮、安装，以及仔细的调试，是保障执行机构无故障、安全运行的基本条件。进一步的注意事项：阀门制造厂商可能已经完成了安装和调试：如果执行机构是安装在阀门上，然后和阀门一起运输到现场，则这些步骤在阀门制造厂已经进行，调试时必须检查各项设定。1.2一般的安全准则本手册所适用的设备是专门为工业应用而设计的安装部件。它们遵循适当的、被认可的某些技术规程。我们假定有关人员已经对基本的安装，以及和运输、组装、安装、调试、维护和修理等有关的工作计划进行过检查。特别重要的是要注意：•包含在目录，定货清单，操作说明，设备铭牌和随机产品手册中的和使用条件（安装、连接、环境和运行条件等）有关的技术数据和规定。•一般的安装和安全准则。•当地的、工厂所订立的规定和要求。•正确使用工具、起重和运输机械。•穿戴个人防护服，特别是在高温和执行机构表面温度很高（由长时间运行所造成的）场合。第4页E20185-P920-B700-X-5D00为明确起见，本手册没有描述各种版本的产品的所有细节，也不可能完全包含安装、操作及维护所有需要考虑的情形。因此，操作说明只包含有当该设备用于其被设计的目的或由合格人员在工业应用时所必须遵守的指令（参见1.1节）。在特定情形下，当该设备应用于非工业领域，如果有更加严格的要求（如防止儿童手指进入的要求），则必须由用户采取保护措施以满足该要求。在有任何怀疑的时候，特别是在缺少产品某一方面的详细说明时，必须向当地的SIPOS销售部门咨询以澄清事实。咨询时请提供产品型号和序列号（参见执行机构的设备铭牌）。建议由有关的SIPOSAKTORIK服务中心的服务和支持人员来从事有关执行机构的所有的计划、安装、调试和维护工作。我们还要指出，这些操作手册和产品说明的内容，不能变更以前或已经存在的协议、约定或合同，或者成为其中的一部分。购买时的协议包含了唯一全部的SIPOSAktorik的责任和义务。本手册的任何说明，既不产生新的也不限制已有的担保。如果额外安装件的生产商提供了特定的安装和操作说明，则这些说明也是本手册使用说明的附加部分，也必须遵守。根据IEC61800-3标准，本产品属于有使用限制的产品，在室内使用时会产生无线电干扰，因此，必要时用户必须自己采取适当的措施来消除。1.3处理和回收包装我们的产品是采用适于厂外运输的特殊包装保护的，包装材质由环保型、很容易分类和回收的东西组成。对于处理包装材料，我们建议废物收集处理中心，我们使用下列包装材料：木质板（OSB）/卡纸板/纸张/聚乙烯塑料执行机构SIPOS电动执行机构具有很长的使用寿命，但是，总会到一个时间，你决定要更换它。我们的执行机构采用模块化设计，可以很容易地解体，并根据材质的不同进行分开和归类，即：•电子废品。•各种金属。•塑料。•润滑油和润滑脂。下列说明适用于一般的情形：•