自动化平台

Imprimé:PozzoGrosMonti-Italiewww.schneider-electric.comModiconPremium自动化平台和Unity软件May2003产品目录AutomationplatformandUnitysoftwareModiconPremiumSchneiderElectricIndustriesSASDIA6ED2030404EN-©2002SchneiderElectric-Allrightreserved*DIA6ED2005-031SchneiderElectric总目录0ModiconPremium自动化平台1-ModiconPremium自动化平台选型指导：Premium处理器和Atrium协处理器............1/2bUnity处理器....................................................1/4bAtrium协处理器................................................1/14bPCMCIA内存扩展卡............................................1/22b框架和风扇模块................................................1/24bBusX总线远程主框架模块........................................1/28b电源模块.....................................................1/302-离散量I/O模块选型指导：离散量I/O模块........................................2/2bTelefast2预接线系统.............................................@bTegoDial/TegoPower安装系统.....................................@b使用Preventa安全模块............................................@3-离散量I/O选型指导：TBX分布式离散量I/O模块................................3/2选型指导：TBX分布式模拟量I/O模块................................3/4选型指导:Momentum离散量I/O基板...............................3/6选型指导：Momentum模拟量I/O基板..............................3/10选型指导：Momentum专用模块I/O基板............................3/12选型指导：Momentum通讯适配器..................................3/14选型指导：防尘防潮远程离散量I/O模块.............................3/164-专用模块和解决方案选型指导:模拟量I/O模块..........................................4/2选型指导:计数器和电子凸轮模块....................................4/4选型指导:运动控制模块...........................................4/6b称重专用模块和解决方案...........................................@b冗余...........................................................@5-通讯选型指导：EthernetCPU和模块.....................................5/2选型指导：网络和总线模块..........................................5/4bEthernetTCP/IP网络............................................5/8v带有集成Ethernet口的处理器....................................5/8vEthernet网络模块.............................................5/9选型指导：工业以太网－ConneXiumindustrialEthernetConneXium.....5/106-Unity软件Unity软件提供...................................................6/2bUnityPro软件..................................................6/4bUnityEFB工具包软件...........................................6/29bUnitySFCView软件............................................6/30bUnityApplicationGenerator.......................................6/32bUnityStudio软件...............................................6/33bOFS数据服务器软件............................................6/417-操作员对话终端b操作员对话终端..................................................@8-人/机接口b人/机接口......................................................@9-服务b文档,标准，认证................................................9/2b产品型号索引...................................................9/9@参考相关产品样本1/0SchneiderElectric11/1SchneiderElectric目录011-ModiconPremium自动化平台1-ModiconPremium自动化平台选型指导：Premium处理器和Atrium协处理器.........................1/2bUnity处理器....................................................1/4bAtrium协处理器................................................1/14bPCMCIA存储扩展卡............................................1/22b框架和风扇模块................................................1/24bBusX总线远程主框架模块........................................1/28b电源模块.....................................................1/301/2SchneiderElectric选型指导0ModiconPremium自动化平台0Premium处理器和Atrium槽式PLCUnityPremium/Atrium平台，适用于UnityPro软件TSX57Cp配置TSX570p处理器TSX571p处理器机架数量(根据机架类型)4/6/8槽1(6槽)1412槽–12“框架内”输入输出(1)离散量I/O192通道(8，16，32或64通道模块)256通道(8，16，32或64通道模块)512通道(8，16，32或64通道模块)模拟量I/O12通道(4，8或16槽模块)24通道(4，8或16槽模块)“框架内”特殊应用通道最大通道数目48集成计数器1个2通道计数模块，最高40KHz–计数2/4通道计数模块，最高1MHz，单通道电子凸轮模块运动(2)用于1/2轴步进电机，2/3/4轴伺服电机及8/16轴SERCOS数字链路模块称重8个传感器测量输入(2个特殊应用通道)串行链路TSXSCY通信模块(1个特殊应用通道)串行连接ModbusRS232D,RS485或BC(3)(4)主/从PCMCIA卡，RS485主/从模块Uni-Telway1个集成RS485主/从通道，RS232D，RS485或BC(3)(4)主/从PCMCIA卡和RS485主/从模块JnetPCMCIA卡，最多3个字符模式1个集成RS485主/从通道，RS232D，RS485或BC(3)(4)主/从PCMCIA卡和RS485主/从模块总线连接ASI总线，V2主站1个“框架内”模块2个“框架内”模块CANopen总线，V4.02主站1个集成PCMCIA卡1个PCMCIA卡(3)INTERBUSV2主站(5)或ProfibusDPV0主站，1类或2类主站(5)–网络连接最大网络数1EthernetTCP/IP多协议模块(ModbusTCP,Uni-TE,GlobalData,I/OScanning,TCPOpen),Webserver,FactoryCastserver或FactoryCastHMIserverFipway/Ethway/ModbusPlus模块Fipway模块(4)，“框架内”Ethway模块ModbusPlus(3),Fipway(3)(4)模块,“框架内”Ethway模块集成过程控制通道数量可配置回路–可编程回路–存储容量无PCMCIA卡96Kb程序和数据96Kb程序和数据带PCMCIA卡96Kb数据128Kb程序96Kb数据224Kb程序数据存储256Kb(PCMCIA扩展卡，位于处理器上部槽位，0号通道)USB编程端口–电源a100…240V或c24V非隔离电源模块a100…240V,c24V非隔离与c24…48V隔离电源模块，每个机架需要一个电源。Premium处理器标准TSXP57104M集成EthernetTSXP571634M(7)g集成CANopenTSXP57Cp0244MTSXP570244M集成FipioTSXP57154M(8)Atrium槽式PLC标准集成Fipio页码1/111/10(1)离散I/O和模拟I/O的最大数目是累加值。(2)1轴=1特殊应用通道，除SERCOS模块外。该模块取决于硬件配置，有2…32个通道。(3)将该卡插入到处理器的下部槽位(1号通道)或槽式PLC的外部PCMCIA插槽(1号通道)当中。(4)将该卡插入到TSXSCY21601通信模块插槽当中。(5)INTERBUS和ProfibusDP模块数限制是累加值。g1/3SchneiderElectric00TSX572p处理器和槽式PLCTSX573p处理器和槽式PLCTSX574p处理器TSX575p处理器1681024通道(8，16，32或64通道模块)2048通道(8，16，32或64通道模块)80通道(4，8或16通道模块)128通道(4，8或16通道模块)256通道(4，8或16通道模块)512通道(4，8或16通道模块)243264–2/4通道计数模块，最高1MHz，单通道电子凸轮模块用于1/2轴步进电机，2/3/4轴伺服电机及8/16轴SERCOS数字链路模块2通道模块带8个传感器测量输入(2个特殊应用通道)TSXSCY通信