通止规标准计算表

上偏差ES(es)0.022下偏差EI(ei)0T值20.002Z值2.80.0028上偏差0下偏差-0.002上偏差0下偏差-0.002上偏差0.002下偏差0上偏差0.002下偏差0上偏差0下偏差-0.001上偏差0下偏差-0.001上偏差0下偏差-0.001输入值公差带孔用量规公称尺寸D(d)10.8孔用量规10.82210.8182通规dT=D+EI+(Z+T/2)10.8038止规dZ=D+ES止规DZ=d+ei校通-通dTT=d+es-Z通规DT=d+es-(Z+T/2)dZT=d+ei+T/210.801轴用量规10.8192校通-损dTS=d+es10.82210.8轴用量规光滑塞规计算T/2值0.001查表值校通-通粗度等级IT70.0038孔用量规0.022磨损量轴用量规0.0038磨损量光滑塞规计算Z+T/20.0038