数控编程举例、练习

整理文档很辛苦,赏杯茶钱您下走!

免费阅读已结束,点击下载阅读编辑剩下 ...

阅读已结束,您可以下载文档离线阅读编辑

资源描述

车床与铣床编程练习毛坯:¢62×100mm棒料。从右端至左端轴向进给切削,粗车每次切削深度2mm,进给量80mm/min,精车余量X向0.4mm。T01粗车外圆车刀T02精车外圆车刀T03切槽刀刀宽3mm夹左端,车右端1、平端面(用端面车刀将毛坯右端面见光,方便对刀)2、程序N0001G00X100Z100N0002T0101N0003M03S450N0004G00X65Z2N0005G71L10Q2R2I0.4K0F80N0006G00X0N0007G01Z0F100N0008G03X20Z-10R10F60N0009G01Z-15F80N0010X30N0011Z-43N0012G02X36Z-46R3F60N0013G01X40F80N0014Z-66N0015X60N0016G00X100N0017Z100N0018T0202N0019G00Z5N0020G70P0006L0015N0021G00X100N0022Z100N0023T0303换切槽刀N0024M03S150N0025G00Z-28N0026X32N0027G01X26F30N0028G04P4N0029G00X31N0030Z-31N0031G01X26F30N0032G04P4N0033G00X31N0034Z-34N0035G01X26F30N0036G04P4N0037G00X100N0038Z100N0039M30调头装夹,车削¢62毛坯至¢60尺寸,同时车削端面保证总长。程序:%12G00Z100M03S500G00X-20Y-20G00Z5G01Z-3F100G01G41D1X0Y0F60G01Y20X23G03X30Y13R7G01Y5G02X25Y0R5G01Y0X0G01G40X-20Y-20G00Z100M30加工中心加工件4-

1 / 4
下载文档,编辑使用

©2015-2020 m.777doc.com 三七文档.

备案号:鲁ICP备2024069028号-1 客服联系 QQ:2149211541

×
保存成功