Excel设计-DIN5480-30°渐开线花键

名称代号花键轴花键套加工方式滚削拉削花键定心方式齿侧定心齿侧定心基准直径dB120120模数m33齿数z38-38花键长度L150200公差等级89偏差系列fH标准压力角inv30°0.05375止端塞规-最大值invaM0.0318525.4837止端塞规-最小值invaM0.0318525.4837通端塞规-最大值invaM0.0318525.4837通端塞规-最小值invaM0.0318525.4837通端塞规-磨损极限invaM0.0318525.4837止端环规-最大值invaM0.000576.85636止端环规-最小值invaM0.000576.85636通端环规-最大值invaM0.000576.85636通端环规-最小值invaM0.000576.85636通端环规-磨损极限invaM0.000576.85636校对塞规-最大值invaM0.0318525.4837校对塞规-最小值invaM0.0318525.4837计算数据压力角α3030节距p9.424789.424778变位量x*m1.35-1.35基本齿廓齿顶高haP1.351.35基本齿廓齿根高hfP1.81.65模数压力角DIN5480花键计算花键套DIN5480-N120x3x38-9H输入数据输出数据齿数棒间距最大值花键径向跳动公差齿廓总公差棒间距最小值(参考)齿轮螺旋线总公差齿距累积公差变位量精度等级花键套齿根圆直径花键套齿根成形圆直径花键套顶圆直径实际齿槽宽最大值实际齿槽宽最小值(参考)作用齿槽宽最小值量棒直径引用标准：DIN5480渐开线函数换算基本齿廓剖面高度hP3.153基本齿廓顶隙cp0.450.3基本齿条的齿根圆角半径ρfp0.480.48节圆直径d114-114基圆直径db98.727-98.727花键轴顶圆直径da1119.4花键轴齿根圆直径df1113.1最小成形余量CFmin0.045花键轴齿根成形圆直径dFf1113.91花键套顶圆直径da2-114花键套齿根圆直径df2-120花键套齿根成形圆直径dFf2-119.49基本齿廓成形余量cFP0.210.21名义齿槽距e26.271作用齿槽宽最小值evmin6.271实际齿槽宽最小值（参考）emin6.305实际齿槽宽最大值emax6.361额定齿厚s16.271作用齿厚最大值svmax6.243实际齿厚最大值（参考）smax6.220实际齿厚最小值smin6.180齿厚偏差/齿槽宽偏差As/Ae-0.0280.000齿厚公差,实际齿槽宽Tact0.0400.056齿厚公差,作用齿槽宽Teff0.0230.034齿厚累积公差.齿槽宽TG0.0630.090单齿距公差fp0.0170.024齿距累积公差Fp0.0400.056齿廓总公差Fα0.0210.028齿轮螺旋线总公差Fβ0.0200.023花键径向跳动公差Fr0.060.06量棒直径DM6跨棒距M1126.095M1检验尺寸的偏差系数A*M11.520跨棒距上偏差AMee-0.078跨棒距下偏差AMei-0.138齿宽测量时的测量齿数k7跨k个齿的公法线长度WK59.710公法线长度偏差系数A*Wk0.866公法线上偏差Awee-0.044公法线下偏差AWei-0.079量棒直径DM5.25棒间距M2109.110M2检验尺寸的偏差系数A*M21.72棒间距上偏差AMie0.155棒间距下偏差AMii0.058跨k个齿的公法线长度WK59.710公法线长度偏差系数A*WK0.866公法线上偏差AWie0.078公法线下偏差AWii0.029z-38m3α30x*m-1.35df2-1200.76dFf2da2-114H11emax6.361emin6.305evmin6.271DM5.25M2max109.265M2minRef109.168Fr0.06Fα0.028Fβ0.023Fp0.056模数压力角齿数模数压力角DIN5480花键计算DIN5480-9H-119.49最小花键轴DIN5480-W120x3x38-8f花键套DIN5480-N120x3x38-9H输出数据齿数棒间距最大值齿廓总公差齿轮螺旋线总公差花键径向跳动公差花键径向跳动公差齿廓总公差齿距累积公差棒间距最小值(参考)跨棒距最大值(参考)齿轮螺旋线总公差齿距累积公差变位量精度等级花键套齿根圆直径花键套齿根成形圆直径实际齿厚最小值量棒直径花键套顶圆直径实际齿槽宽最大值实际齿槽宽最小值(参考)作用齿槽宽最小值量棒直径变位量精度等级跨棒距最小值花键轴顶圆直径花键轴齿根成形圆直径花键轴齿根圆直径作用齿厚最大值实际齿厚最大值（参考）z38m3α30x*m1.35da1119.4h11dFf1df1113.1-0.757svmax6.243smax6.220smin6.180DM6M1maxRef126.017M1min125.957Fr0.06Fα0.021Fβ0.020Fp0.040DIN5480花键计算DIN5480-8f113.91最小花键轴DIN5480-W120x3x38-8f输出数据